The
writing desk is approximately 30" tall, 24" deep and 44" long,
with some potential for variation in dimensions. The aprons are about 4" wide and the two drawers about
3" tall. The legs are tapered
from 2" thick stock. (See web site for examples.) Including waste, the desk requires about 35 board feet of
4/4 material and about six board feet of 8/4 for the four legs. I encourage
you to bring wood if possible but I also have wood on hand that is competitively priced. Let me know in advance.
Please
make a drawing of the writing desk, no matter how rough! There is no need to
worry about the construction details; we will work them out in class. From your
drawing, make up a parts list with names and approximate dimensions.
Dovetail saw
Cutting gaugeÉcuts
across the grain (A ÒwheelÓ (disc) marking gauge works best.)
Dovetail marking gauge or
sliding bevel
2 in. to 3 in. steel square
6" rule
Combination Square
Tape measure (shorter is
better)
Dead blow hammer (14 to 20
oz.) Ð No rubber mallet
Sharp bevel edge chisel set
Safety equipment: safety
glasses, dust mask, hearing protection
I will have extra tools
on hand for sale and to try out.
Call or email me with any
questions on tools, materials or design and check the web site for any updates.
If I donÕt hear from you I will call a week or two before the class.
Kelly Mehler (859) 986-5540